Crown Audio IQ3USP4CN PIP-USP4-CN IQ Programmable Input Processor Card
Condition | Brand New |
---|---|
Country of Manufacture | China |
Overview
The Crown Audio PIP-USP4-CN IQ Programmable Input Processor (PIP) Card is a DSP input module designed for CTs Series two-channel amplifiers. The card connects to an Ethernet network which enables remote control and monitoring of the amplifier using System Architect software. The card also makes it possible to transport digital audio in real time via AES3 or CobraNet.
The unit is a HiQnet series component and connects via a 100 Mb Ethernet hardware that provides a single plug solution for control,monitoring,and audio distribution. It utilizes an OMNIDRIVEHD processor to provide DSP such as LevelMAX limiting,FIR filters,IIR filters,faders,meters,audio routing,polarity,mute,compression,delay,error reporting,and load monitoring. It also features noise and sine wave generators for testing and noise masking. Additional control and monitoring can be connected through the auxiliary port. The analog to digital and digital to analog conversion stages are performed by 24-bit 192 kHz Cirrus Logic converters.
- Limiting
- Provides LevelMAX peak,RMS,and transducer thermal voltage protection
- Preset Indicator
- Signals the number of the current preset by flashing a series of flashes equal to the preset number
- Data Indicator
- Flashes when the PIP-USP4 receives a valid command addressed to PIP-USP4
- Reset/Preset Switch
- Changes presets and restores to factory default settings
- Aux Connector
- Allows for connection of contact closure input and output for control options
- Network Connector
- Enables network HiQnet control and CobraNet audio
- Auto Standby
- Improves energy efficiency
- Digital Audio On/Off Ramp
- Allows users to send pre or post processed analog signal out of the module to adjacent amplifiers
- Foldback Control
- Enables Amplifier output monitoring through CobraNet network
- Sweep Load Monitoring (SLM)
- Provides system-level diagnostics
- Delay
- Provides up to 4 seconds of delay per channel
- Input Compressors
- Provides dynamic processing per channel
- Ambient Leveler
- Senses the ambient sound level of a room via connected loudspeakers
- Presets
- Provides 50 user select-able presets
- Processing
- Utilizes 96 kHz OMNIDRIVEHD processing with 24-bit 192 kHz Cirrus logic A/D and D/A converters
- Memory Backup
- Uses non-volatile FLASH memory to backup run-time parameters,presets,and program storage with 10 year data retention and 20+ year life-cycle
Condition | Brand New |
---|---|
Country of Manufacture | China |