JBL PRX735 15" Three-Way Full-Range Main System

The PRX735 is a self-powered,lightweight three-way loudspeaker system capable of delivering a very high level of performance over a broad bandwidth.

Features:

• 136 dB peak SPL
• 15" Differential Drive® low-frequency driver for low-distortion and higher SPL
• 1.5" diameter next generation JBL neodymium compression driver
• 165 mm (6.5 in) horn loaded midrange transducer
• JBL designed waveguide for accurate coverage
• Efficient Class-D amplifier technology
• Normal and Boost user selectable EQ presets
• DSP input section,crossover,dynamic limiting,component optimization,selectable system EQ
• Line level and direct microphone input capability
• Professional XLR-1/4" combination inputs,RCA inputs,and XLR loop-through
• Multiple injection molded handles with backing cup for easy transport
• Integrated M10 suspension points for easy setup
• Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™finish.
• Cloth backed,dent-resistant 16 gauge steel grilles

Applications:

• This speaker is ideally suited to applications where the program material exhibits subtlety and nuance. Perfectly capable of reproducing high fidelity full range sound without a subwoofer,when coupled with the extended low frequencies of the PRX718XLF,complete control over the entire audio spectrum is attained. As with all the full-range PRX700 Series systems,two EQ selections can be used to optimize the system for the program material and/or environment. The input section also accommodates either Line or Mic/Instrument level inputs.
• The PRX735 is a self-powered,lightweight three-way loudspeaker system capable of delivering a very high level of performance over a wide bandwidth. The PRX735 is comprised of one 15 in 275G Differential Drive® woofer,a 165 mm (6.5 in) 196H horn-loaded mid-range and a 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm,neodymium compression driver mounted to a 90° by 50° horn,all driven by a 1500 watt Audio Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section,providing user selectable system EQ,protection,input sensitivity selection,cross-over functionality,dynamic limiting and discrete component optimization.
• All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm,strong,light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.
• The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility,making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level,via the level control knob.

Specifications:

• Power Rating: 1500 W
• AC Power Input: 100V - 240V~ 50/60 Hz
• Frequency Range (-10 dB): Normal: 35 Hz – 20 kHz / Boost: 34 Hz – 20 kHz
• Frequency Response (±3 dB): Normal: 42 Hz – 20 kHz / Boost: 39 Hz – 20 kHz
• Coverage Pattern: 90° x 50° nominal
• Directivity Index (DI): 10.5 dB
• Directivity Factor (Q): 11.2
• Crossover Frequency: 480 Hz,2.0 kHz
• Maximum SPL: Normal: 136 dB / Boost: 136 dB
• Signal indicators:
• Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting
• Signal: Green LED indicates signal present
• Power/Standby: Blue indicates system has power and ready to pass audio,Red indicates system has power but is in a power saving mode and will not pass audio.
• Dynamic Control (Input): dbx Type IV™ limiter circuit
• Input Impedance: 20K Ohms (balanced),10K Ohms (Unbalanced)
• LF Driver: 2 x JBL 275G 380mm (15 in) woofer
• MF Driver: 1 x JBL 196H 165mm (6.5) horn-loaded midrange transducer
• HF Driver: 1 x JBL 2408H-2 37.5 mm (1.5") annular polymer diaphragm,neodymium compression driver
• Enclosure: Trapezoidal,18 mm,plywood
• Suspension/Mounting: 12 x M10 Suspension Points
• Transport: 2x integrated handle with injection molded backing cup
• Finish: Obsidian DuraFlex™ finish
• Grille: Powder coated,Obsidian,16 gauge perforated steel with acoustical transparent black cloth backing.
• Input Connectors: 2 x Balanced XLR / 1/4 inch input,2 x unbalanced RCA input
• Output Connectors: 1 male XLR balanced output.
• Dimensions (H x W x D): 952.5 mm x 445.0 mm x 537.97 mm (37.5 in x 17.52 in x 21.18 in)
• Net Weight: 34.9 kg (77 lb)